outletk — Sends a krate signal out from an instrument to a named port.
Sname -- String name of the outlet port. The name of the outlet is implicitly qualified by the instrument name or number, so it is valid to use the same outlet name in more than one instrument (but not to use the same outlet name twice in one instrument).
ksignal -- krate output signal
During performance, the krate output signal is sent to each instance of an instrument containing an inlet port to which this outlet has been connected using the connect opcode. The signals of all the outlets connected to an inlet are summed in the inlet.
Here is an example of the outletk opcode. It uses the file outletk.csd.
Example 586. Example of the outletk opcode.
See the sections Real-time Audio and Command Line Flags for more information on using command line flags.
<CsoundSynthesizer> <CsOptions> ; Select audio/midi flags here according to platform -odac ;;;realtime audio out ;-iadc ;;;uncomment -iadc if realtime audio input is needed too ; For Non-realtime ouput leave only the line below: ; -o inletk.wav -W ;;; for file output any platform </CsOptions> <CsInstruments> sr = 44100 ksmps = 32 nchnls = 2 0dbfs = 1 connect "bend", "bendout", "guitar", "bendin" instr bend kbend line p4, p3, p5 outletk "bendout", kbend endin instr guitar kbend inletk "bendin" kpch pow 2, kbend/12 printk2 kpch asig oscili .4, 440*kpch, 1 outs asig, asig endin </CsInstruments> <CsScore> f1 0 1024 10 1 i"guitar" 0 5 8.00 i"bend" 3 .2 -12 12 i"bend" 4 .1 -17 40 e </CsScore> </CsoundSynthesizer>