zacl — Clears one or more variables in the za space.
kfirst -- first zk or za location in the range to clear.
klast -- last zk or za location in the range to clear.
zacl clears one or more variables in the za space. This is useful for those variables which are used as accumulators for mixing a-rate signals at each cycle, but which must be cleared before the next set of calculations.
Here is an example of the zacl opcode. It uses the file zacl.csd.
Example 1065. Example of the zacl opcode.
See the sections Real-time Audio and Command Line Flags for more information on using command line flags.
<CsoundSynthesizer> <CsOptions> ; Select audio/midi flags here according to platform ; Audio out Audio in No messages -odac -iadc -d ;;;RT audio I/O ; For Non-realtime ouput leave only the line below: ; -o zacl.wav -W ;;; for file output any platform </CsOptions> <CsInstruments> ; Initialize the global variables. sr = 44100 kr = 4410 ksmps = 10 nchnls = 1 ; Initialize the ZAK space. ; Create 1 a-rate variable and 1 k-rate variable. zakinit 1, 1 ; Instrument #1 -- a simple waveform. instr 1 ; Generate a simple sine waveform. asin oscil 20000, 440, 1 ; Send the sine waveform to za variable #1. zaw asin, 1 endin ; Instrument #2 -- generates audio output. instr 2 ; Read za variable #1. a1 zar 1 ; Generate the audio output. out a1 ; Clear the za variables, get them ready for ; another pass. zacl 0, 1 endin </CsInstruments> <CsScore> ; Table #1, a sine wave. f 1 0 16384 10 1 ; Play Instrument #1 for one second. i 1 0 1 ; Play Instrument #2 for one second. i 2 0 1 e </CsScore> </CsoundSynthesizer>